Fresh Fruit Light Color Citizen CLU038 Size 50W LED COB Chip Hot
Sell Ukraine Market 3 Years Warranty
Product Description
Product Information |
Item | 30-50W Fresh fruit light color LED COB CHIP |
Size | 19*19/17MM |
Current | 750-1200mA |
Voltage | 36-39V |
light color | Fresh fruit/ Vegetable light color |
Chip Material | InGaN |
CRI | 90 |
Luminous Flux Spanlife
| 5000-6000LM 50000 hours |
Specification
- LEDs Type: 19*19/17MM Fresh fruit light color led cob chip
- Wattage: 30-50W
- Voltage: 36-39V
- Current: 750-1200mA
- Size: 19*19/17MM
- Luminous Flux: 5000-6000LM
- Color Rendering Index: ＞90
- Operation temperature: -30℃-+75℃
- Storage temperature: -30℃-+75℃
- Case Temperature: 85℃
- Junction Temperature: 125℃
- Soldering temperature: 350℃± 10℃ For 5 Seconds
- ESD Sensivity: 2000V HBM
- Continuous Operation Test: Tc=85℃ IF=600mA 1000H
- Low/High Temperature Storage Test: -40℃/30min~ +100℃/30min 100
Cycles
- Low Temperature Storage Test: Ta=-40℃ 1000H
Product features
Special light color
1. Special color points: color performance is more abundant,
improve the value of goods, customize light for customers, can meet
the needs of customers on different occcasions.
2. This kind of light is specially used in large supermarkets and
shopping malls to illuminate fruits and vegetables to make the
colors of fruits and vegetables look better under the light.
3. The right lighting can make a big impact on the success of your
fresh food department. Fresh food accent lighting is the perfect
recipe for delicious presentation while extending the shelf life of
your fresh produce.
4. The best presentation: according to research people remember the
color of fresh products as being more saturated than they really
are. And when it comes to actually choosing a product, consumer
preferences go even further – they want a color that’s even more
saturated than what they remember. The right lighting recipe can
optimize presentation and enhance sales.
5. Preserve quality: good lighting affects the quality of fresh
produce. The right lighting recipe helps keep food fresh longer,
which means a longer shelf life and less waste.
Application
Clothing light color/ Ice Seafood light color/ Bacon light color/
Food bread light color/ Fresh fruit light color/ vegetable light color/ mahogany furniture light color/ Rice light color/ Home software
light color/ Ceramic light color
Related products
User Manuel
Storage
To avoid moisture, we recommend storage conditions for the unopened
LED +5 ~ +30℃ rela-tive humidity <60%. LED should be used within
168 Hrs. of opening the package. Please make sure to dehumidify and
vacuum pack the remaining/ unused LED. Dehumidifying condition:
+120℃±5℃ of 4Hrs. Effective age for the sealed led is one year.
The soldering precautions
Soldering conditions: Reflow soldering is not recommended for this
LED. If hand soldering, set sol-dering iron temperature at 350℃ and
soldering time not More than 5 seconds, after the first soldering,
make sure the substrate surface temperature returns to ambient
temperature before a second soldering. Please. make sure when
soldering, there is no external force on the soldering surface and
silicon batardeau (such as pressure, friction or sharp metal nails,
etc.), to avoid gold wire deformation or dam-age and other
abnormalities. If beyond recommended conditions, we cannot
guarantee the LED stability, please do the risk assessment first.
During assembly, please ensure that a good quality thermal paste is
applied and distributed evenly over the surface. While using
thermal pad (Heat Sink), make sure LED is firmly tightened and
there is no gap between surfaces. In such heat-media products,
through a pressure test of at least 500 volts.
Anti-static measures
Please take adequate measures to prevent electrostatic generation,
such as wearing electrostatic ring or anti-static fingerstall etc;
any relative products like plant equipment, machinery, carrier and
transpor-tation units shall be connected to discharging unit/
ground. The ESD sensitivity of this product is > 1000V(HBM),
after assembly the final lamp, please make sure to discharge Static
Electricity by proper ESD equipment.
Temperature control
Recommended temperature conditions for enhanced product life: Be
sure to TS point (negative pads) controlled below 85℃, COB
recommendation colloid surface temperature control ≤150℃.
The drive control
Drive this product at constant current. Output current range
specifications should be ac-cording to the operational and other
conditions, as mentioned in data sheet. Before using a constant
voltage source or altered specifications other than recommended,
please consider risk factors.
Trade Show
Customers feedback
1. I normally don't write reports but I was surprised for good
about this product. Unbelieved brightness. Consider using a dimmer
to control the bright. For sure I will buy a few more for my home
project.
2. These are much better when used as under cabinet lighting than the
standard chip style. Especially with reflective countertops. It's
much more uniform and clean looking in the reflection. I install
many strips through my electrical business. These were very great.
3. My customer is so happy with this lighting. The leds are bright
and dimmable and a great white shade., not blue or amber. Most
importantly they are a solid light, no dots. Looks very high end.
This is the only led strip lighting I will install from now on.
4. I have used a ton of other products from skye and this is by far
my favorite. It looks awesome without all the individual diodes. I
used a 24v transformer and made sure the wattage was rated higher
that the 3w per ft I planned to use. These bend much tighter and are more flexible than other brands if
used as well. I combine these with aluminum channels I buy from
amazon to make them look like a fixture, including inside and
outside corners.
Awesome light
5. Great tape lighting...such an upgrade from the "dotted" style.
Would HIGHLY recommend this product for under cabinet, under
counter, around mirrors in bathrooms, etc.
